Piezoelectric Clouds and Aerosols Link to Catastrophic Floods 8

Piezoelectric Clouds and Aerosols Link to Drought and Cratastrophic Floods

Related article: Climate and Biological Manipulation Using Contrails Seeded With Heavy Metals

Piezoelectric Cloud

Sat24.com is the European weather satellite service that provides medium resolution imaging loops in the visible and infrared spectrum.

This short video will focus on the issue of artificial aerosol clouds that express a piezoelectric characteristic based on applied radio frequency energy from fixed-based transmitters.

The variation in the distance between the aerosol cloud waves is a result of the frequency of the energy applied.

Notice how the waves remain stationary over a geographic area while the aerosols flow past them, from left to right.

This indicates that the transmitters are in a fixed location and intended to polarize the aerosols that act as cloud condensation nuclei.

Moisture within this layer can either be trapped to produce drought or later reverse-polarized to cause floods.

This technology allows eco-terrorists the ability to create a water bomb by withholding rain until it is released over a city or region targeted for a catastrophic flooding.

The Piezoelectric Effect is the ability of certain materials, like Barium Titinate to either:

1) generate an electric charge in response to externally applied mechanical pressure.
2) generate pressure by application of an external electric charge.

A fixed-based transmitter capable of focusing pulses of electrical energy into the barium-laced artificial clouds could, therefor, produce heat through rapid and alternating expansion and collapse of Barium Titanate.

Warming of the artificial cloud layer in this way could act to inhibit condensation in addition to the super-saturation of CCN already provided by the aerosols, themselves.

During World War II, researchers discovered a new class of man-made materials, called ferroelectrics, which exhibited piezoelectric constants many times higher than natural piezoelectric materials such as quartz. One of these was developed is barium titanate.

Barium – along with aluminum –  has been found in rainwater samples related to aircraft contrail emissions suspected of containing aerosols of barium, aluminum and other environmental pollutants.


The Piezoelectric Effect  (Source)

What is the Piezoelectric Effect?

Piezoelectric Effect is the ability of certain materials to generate an electric charge in response to applied mechanical stress. The word Piezoelectric is derived from the Greek piezein, which means to squeeze or press, and piezo, which is Greek for “push”.

One of the unique characteristics of the piezoelectric effect is that it is reversible, meaning that materials exhibiting the direct piezoelectric effect (the generation of electricity when stress is applied) also exhibit the converse piezoelectric effect (the generation of stress when an electric field is applied).

When piezoelectric material is placed under mechanical stress, a shifting of the positive and negative charge centers in the material takes place, which then results in an external electrical field. When reversed, an outer electrical field either stretches or compresses the piezoelectric material.

The piezoelectric effect is very useful within many applications that involve the production and detection of sound, generation of high voltages, electronic frequency generation, microbalances, and ultra fine focusing of optical assemblies. It is also the basis of a number of scientific instrumental techniques with atomic resolution, such as scanning probe microscopes (STM, AFM, etc). The piezoelectric effect also has its use in more mundane applications as well, such as acting as the ignition source for cigarette lighters.

The History of the Piezoelectric Effect

The direct piezoelectric effect was first seen in 1880, and was initiated by the brothers Pierre and Jacques Curie. By combining their knowledge of pyroelectricity with their understanding of crystal structures and behavior, the Curie brothers demonstrated the first piezoelectric effect by using crystals of tourmaline, quartz, topaz, cane sugar, and Rochelle salt. Their initial demonstration showed that quartz and Rochelle salt exhibited the most piezoelectricity ability at the time.

Over the next few decades, piezoelectricity remained in the laboratory, something to be experimented on as more work was undertaken to explore the great potential of the piezoelectric effect. The breakout of World War I marked the introduction of the first practical application for piezoelectric devices, which was the sonar device. This initial use of piezoelectricity in sonar created intense international developmental interest in piezoelectric devices. Over the next few decades, new piezoelectric materials and new applications for those materials were explored and developed.

During World War II, research groups in the US, Russia and Japan discovered a new class of man-made materials, called ferroelectrics, which exhibited piezoelectric constants many times higher than natural piezoelectric materials. Although quartz crystals were the first commercially exploited piezoelectric material and still used in sonar detection applications, scientists kept searching for higher performance materials. This intense research resulted in the development of barium titanate and lead zirconate titanate, two materials that had very specific properties suitable for particular applications.

Piezoelectric Materials

There are many materials, both natural and man-made, that exhibit a range of piezoelectric effects. Some naturally piezoelectric occurring materials include Berlinite (structurally identical to quartz), cane sugar, quartz, Rochelle salt, topaz, tourmaline, and bone (dry bone exhibits some piezoelectric properties due to the apatite crystals, and the piezoelectric effect is generally thought to act as a biological force sensor). An example of man-made piezoelectric materials includes barium titanate and lead zirconate titanate.

In recent years, due to the growing environmental concern regarding toxicity in lead-containing devices and the RoHS directive followed within the European Union, there has been a push to develop lead free piezoelectric materials. To date, this initiative to develop new lead-free piezoelectric materials has resulted in a variety of new piezoelectric materials which are more environmentally safe.

Applications Best Suited for the Piezoelectric Effect

Due to the intrinsic characteristics of piezoelectric materials, there are numerous applications
that benefit from their use:

High Voltage and Power Sources

An example of applications in this area is the electric cigarette lighter, where pressing a button causes a spring-loaded hammer to hit a piezoelectric crystal, thereby producing a sufficiently high voltage that electric current flows across a small spark gap, heating and igniting the gas. Most types of gas burners and ranges have a built-in piezo based injection systems.


The principle of operation of a piezoelectric sensor is that a physical dimension, transformed into a force, acts on two opposing faces of the sensing element. The detection of pressure variations in the form of sound is the most common sensor application, which is seen in piezoelectric microphones and piezoelectric pickups for electrically amplified guitars. Piezoelectric sensors in particular are used with high frequency sound in ultrasonic transducers for medical imaging and industrial nondestructive testing.

Piezoelectric Motors

Because very high voltages correspond to only tiny changes in the width of the crystal, this crystal width can be manipulated with better-than-micrometer precision, making piezo crystals an important tool for positioning objects with extreme accuracy, making them perfect for use in motors, such as the various motor series offered by Nanomotion.

Regarding piezoelectric motors, the piezoelectric element receives an electrical pulse, and then applies directional force to an opposing ceramic plate, causing it to move in the desired direction. Motion is generated when the piezoelectric element moves against a static platform (such as ceramic strips).

The characteristics of piezoelectric materials provided the perfect technology upon which Nanomotion developed our various lines of unique piezoelectric motors. Using patented piezoelectric technology, Nanomotion has designed various series of motors ranging in size from a single element (providing 0.4Kg of force) to an eight element motor (providing 3.2Kg of force). Nanomotion motors are capable of driving both linear and rotary stages, and have a wide dynamic range of speed, from several microns per second to 250mm/sec and can easily mount to traditional low friction stages or other devices. The operating characteristics of Nanomotion’s motors provide inherent braking and the ability to eliminate servo dither when in a static position.


Barium Titanate




Photorefractive effect


Soliton (Optics)


Hydrothermal synthesis


DAVID KEITH:   Photophoretic levitation of engineered aerosols for geoengineering (PDF)

An Idealized Example. As a specific example, consider a thin disk with radius ∼5 μm and thickness 50 nm composed of three layers: 5 nm aluminum oxide, 30 nm of metallic aluminum, and finally 15 nm of barium titanate (Fig. 1C). The thickness of the Al layer is chosen so that it has high solar-band reflectivity.

“Silica-alumina ceramic hollow microspheres with diameters of 1 μm (e.g., 3M Zeeospheres) can be purchased in bulk at costs less than $0.3/kg. Moreover, bulk vapor-phase deposition methods exist to produce monolayer coatings on fine particles, and there are rapid advances in self-assembly of nanostructures that might be applicable to bulk production of engineered aerosols.”


Piezoelectric Materials: Crystal Orientation and Poling Direction





  1. Pingback: Intelwars2 – September 2, 2016 – *Breaking News Headlines!* The Constitution – The Bill of Rights – And The Ten Commandments Are Under Assault! 24 Hour Emergency Broadcast Lines! (512) 646 – 5000 or (605) 562 – 7701. For Tomorrows News, Today!

  2. Pingback: Intelwars2 – September 2, 2016 – *Breaking News Headlines!* The Constitution – The Bill of Rights – And The Ten Commandments Are Under Assault! 24 Hour Emergency Broadcast Lines! (512) 646 – 5000 or (605) 562 – 7701. For Tomorrows News, Today!

  3. I live near Stanford in California.
    I have seen only one chemtrail in 4 days. (Sept 2, 2016)
    It is normal for me to see 3 to 5 trails every time I go outside in the daylight. Is the change just here or are others seeing fewer chemtrails?
    Thanks for looking.

  4. The chem trails are still over head. They are said to be spraying to slow down global warming but this is not what they are about. They are part of Agenda 21—a plan to reduce the population on earth. With our current technology we have an over load of ‘useless eaters’. People are no longer needed and so we are being eliminated.

    We are being sprayed with aluminum which causes brain damage. Now the Alzheimer Disease rate has gone way up and the majority of our children are now suffering dyslexia and autism to the point that these problems are no longer rare. Aluminum damages our brains.

    Put that together with the fluoride in our water we are docile and complacent. Fluoride was put in the water in the German concentration camps to prevent uprisings.

    Go to the web site http://www.geoengineeringwatch.org and learn more than you want to know.

  5. Pingback: Links 191-spy wifi can read your lips, Deutsche Bank, vigilant citizen | Cindy's Zone 2

  6. Pingback: Formazioni nuvolose artificiali all’origine di siccità ed inondazioni | NUTesla | The Informant

  7. Pingback: Piezoelectric Clouds and Aerosols Link to Catastrophic Floods | Chemtrails: The Exotic Weapon | rudolfwordpressblog

Leave a Reply

Please log in using one of these methods to post your comment:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google+ photo

You are commenting using your Google+ account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )


Connecting to %s